Pulsed Hydraulics, Inc.
Pulsed Hydraulics is a proven mixing technology for wastewater, cutting the energy used for mixing by 50% over traditional mechanical mixing equipment. The PHi mixing system is designed for use in:
Anoxic and Aerobic basins; Sludge holding tanks; Chemical Mixing; Grease cap removal; Polymer and Alum mixin
AWC Water Solutions Ltd.
designs and builds complete packaged and modular water and wastewater treatment systems including: AC Clarifier; Tube Settler (ST) ; Dissolved Air Flotation (DAF); Direct Filtration (DF); Pressure Filters; Ultrafiltration (UF) membrane technology and Nanofiltration (NF) / Reverse Osmosis (RO) applications; Moving Bed Biological Reactor (MBBR); and Membrane Bioreactor (MBR).
Headworks® is a leading supplier of water and wastewater screening systems including MS bar screens, Eliminator™ band screens, Perforator® screens, Transpactor™ shaftless screw conveyors and compactors, Screwpactor™ compactors, Spiralman™ in-channel, shaftless spiral screens and TurboDrum™ drum screens.
Regal™ products are used world-wide for water and waste water treatment using chlorine gas. Municipal, industrial and agricultural industries depend on Regal™ chlorinators for disinfection, bacteria and odor control, and algae and slime removal.
Philadelphia Mixing Solutions
Philadelphia Mixing Solutions offers Low Speed Surface Aeration, Aero-Brush Brush Rotor, Submersible Mixers, Floating Directional Aerators, Egg Digester Mixing Systems, Flocculators, Flash Mixers, HALO Oxidation Ditch Systems and Lagoon Systems.
They also offer mixer surveys and drive exchange programs for all brands of mixing equipment.
Brentwood Solutions for Water including trickling filters, submerged fixed film media, sediment vacuum systems, tube settlers, storm water systems, and they are the leading supplier of 100% non-metallic chain & flight collector systems.
Glasco UV systems are designed for municipal water and wastewater disinfection, TOC reduction, Ozone destruction, liquid sugar, chlorine destruction, chloramine destruction and many applications serving residential, commercial, industrial markets.
Water and Wastewater Treatment: Circular Clarifiers and Clarifier Rebuilds, API Oil/Water Separators, Parallel Plate Clarifiers (Horizontal and Vertical Flow), Oil Recovery (Skimming) Units, Air Strippers and Grit Separators.
Air and Gas Cleaning Systems: Packed Bed Scrubber, Venturi Air Scrubber, Cartridge/Baghouse
Dust Collectors, Carbon Adsorbers, Multi-Stage Scrubbing Systems, Bio Tower Scrubbers, Oil Mist Collectors.
A recognized expertise in granular media filter design, supply, installation, operation and optimization. Central to AWI’s filter optimization reputation is an array of durable, dependable, filter optimization products including the Phoenix underdrain system.
Biwater AEWT is the largest supplier of Municipal Reverse Osmosis and Nanofiltration water treatment plants in the United States and one of the largest suppliers in the world and leads the industry in system design, start-up and operation
Filtrations solutions designed for: Arsenic, Iron & Manganese, Radium, Fluoride, Sulfide, Turbidity, Ground Water, Sea Water, Heavy Metal Waste, Cooling Tower Side Stream, Secondary Sewage, and Heavy Suspended Solids
Headworks Bio offers biological wastewater treatment processes for a variety of municipal and industrial applications; Moving Bed Biofilm Reactor (MBBR) technology, fixed-film wastewater treatment, and integrated fixed-film activated sludge (IFAS) wastewater systems.
Headworks Bio also offers a Gravity Sand Filter (GSF), which is an upflow, continuous backwash,
granular media filter that efficiently removes suspended and colloidal solids while providing a
continuous supply of filtered water.
Danfoss Variable Frequency Drives (VFD) and Soft Starters include the new VLT™ 8000 Aqua VFD designed specifically for the global water and wastewater process control market. Danfoss drives provide an automated, extremely accurate means for speed control of AC motor driven
equipment including flow and pressure control in pumping and blower systems.
Grundfos Measurement and Control
Conex® measuring amplifier and controller. These systems allow you to measure multiple parameter and controls such as: temperature, pH, redox, chlorine, chlorine dioxide, ozone, hydrogen
peroxide, peracetic acid and fluoride.
Flygt (A Xylem Company) is the world’s leading manufacturer of submersible pumps and mixers and is part of Xylem, the world’s largest pump company.
Pumps are available in numerous configurations including non-clog trash, chopper, grinder, dry pit and
the new clog resistant ultra-efficient N-impeller.
Flygt is the technological leader in submersible pumps and mixers and dedicates
huge resources to Research and Development constantly improving and developing their products.
Xylem DBS Municipal Dri-Prime Backup Pumping
To ensure uninterrupted flow of wastewater, many lift stations are equipped with Dri-Prime Backup Systems (DBS) as contingency plans for pump stations. The DBS provides independently-powered backup pumping for a variety of emergency situations, making it ideal for regions prone to hurricanes, heavy rains or intense snowmelt.
Crane/Weinman is a supplier of pumps to the industrial and municipal markets. They offer numerous types of pumps including end suction, horizontal split case, in-line, non-clog, circulator,
vertical turbine, recessed vortex and sump pumps.
Grundfos Digital Dosing Pumps
Grundfos is a worldwide company and an innovative supplier of high-quality products in the environmental technology and water treatment markets. Grundfos manufactures and markets metering
pumps, disinfection systems, metering systems as well as the associated measuring and control technology.
Warren Rupp / Sandpiper
Warren Rupp holds a leading position in the air-operated, diaphragm pump market with the broadest range of pump sizes, types and models. It is marketed primarily under the trade name of SandPIPER Pumps.
PACKAGED PUMP STATIONS
OneLift Pump Station
OneLift pump stations are designed as a “stackable” structures with a unique oval shape and integral valve vault, providing standard mechanical equipment, select options, and repeatable design. We offer Custom pre-built concrete pump stations, valve chambers and buildings shipped in pieces and easily assembled on-site.
Fiberglass packaged pump stations and valve vaults providing standard mechanical equipment pre-assembled and shipped to the jobsite for installation and final connection. Above ground valve chambers housed in fiberglass building structures are also available.
PUMP STATION ACCESSORIES
HDL Check Valves
HDL Check Valves are a high quality non-clog ball check valve that operates in any position for municipal, industrial, commercial wastewater and raw water.
Flygt Mixed Flush Valves
The Flygt mixed flush valve is designed to reduce station cleaning and maintenance costs. They create intense turbulence in the wet well so that sludge and floating solids such as grease are re-suspended and pumped out of the station.
BIO-SYSTEMS International is the leading manufacturer of bacterial products and micronutrients specifically for use in wastewater treatment; controlling grease in lift stations, grease traps and anywhere else grease is encountered in municipal sewage.
Gorman Rupp is the manufacturer of extremely high quality self-priming and prime assisted engine and electric driven centrifugal pumps for water and wastewater applications. Gorman Rupp also has a line of submersible dewatering pumps that are excellent in quarry applications.
PORTABLE EQUIPMENT ACCESSORIES
Pumping Services is a stocking distributor for Kanaflex Corporation, a manufacturer of rubber and plastic hose. Kanaflex’s revolutionary production methods have taken the best properties of
plastics and rubber, producing products capable of outperforming conventional plastic and rubber hose.
We stock thousands of feet of rubber, PVC and mill hose from 2” to 12” diameter in our warehouse
available for immediate delivery.
P-T Coupling Company, Inc.
Pumping Services is a stocking distributor for P-T Coupling Company, a high quality manufacturer of quick disconnect fittings for low pressure liquid and dry product transfer applications.